93 08 – ACCESSORIES + GUIDES DAILY USE AND MAINTENANCE Start the hood in time The most important aspect of ventilation is to remember to start the hob once you start cooking. Any delay would result in greatly diminishing its efficiency, only a few minutes delay could mean less than 50% efficient. That is also the reason why SENSE automatic ventilation is recommended as it means you're always extracting at optimum levels. Close the windows and leave a door ajar Ventilation is most effective if you close the kitchen windows but ensure that the fan can get supply air, for example by keeping the door to the living room ajar. Set the hood to correct speed setting Setting your hood to an extraction level of between 300 and 550 m³/h, should be efficient. If you have to turn on the fan at a higher level or use the boost function, you have probably already ruined the food. If your hood is equipped with RørosHetta SENSE, it will regulate this automatically, allowing care-free cooking. Remember to leave the fan on for a while after you have finished cooking Use the lowest setting to ventilate the room for about 15 to 30 minutes after you have finished cooking. This feature is also important because it helps to dry out the grease filter after cooking. RørosHetta SENSE regulates this automatically. Maintaining your filters The grease filter should be washed regularly, every month. Place in hot water and washing-up liquid in the sink, or wash in the dishwasher at a maximum of 50°C. If your hood is not duct out, it needs a charcoal filter. The charcoal filter should be replaced every 3 months, unless it is a SENSE Long-life monoblock filter. The monoblock carbon filter has a working lifetime of up to 5 years (900 hours of cooking). YES NO ‹50° HOW TO USE YOUR HOOD AS EFFICIENTLY AS POSSIBLE 5-YEAR WARRANTY HOW TO MAINTAIN YOUR RØROSHETTA HOOD A promise of quality that is built to last Every RørosHetta hood is designed with sustainability in mind, conserving both energy and natural resources, without compromising performance. The commitment on the promise of quality, is backed by a 5-year guarantee on all hoods. Surface maintenance PVD-coated and lacquered hoods can easily be cleaned with hot water and washing-up liquid. Steel hoods can be maintained with a steel cleaner, or you can use a damp cloth followed by a dry microfibre cloth. Please note that models in brushed steel and PVD-coated panels have been treated to resist fingerprints. Do not use microfibre cloths on products coated with high-gloss lacquer or PVD.